Whirlpool Refrigerator WRX735SDHZ02 Water Filter

Brand: Everydrop by Whirlpool Ice and Water Refrigerator Filter
Model: Everydrop Filter 4 - EDR4RXD1
Compatible With: Whirlpool French Door Refrigerator Model Number WRX735SDHZ02
Material: BPA-free, food-grade plastic
Dimensions: 2.5"D x 9.38"W x 3"H
Item Weight: 9.6 ounces
Capacity: 200 gallons
Filter Life: 6 months
Country of Origin: USA
Certification: NSF/ANSI Standard 42 & 53
Operating Temperature: 33–100°F (0.6–38°C)

• Perfect Fit for Whirlpool WRX735SDHZ02 : Designed as the exact Whirlpool model WRX735SDHZ02 water filter replacement for a secure, leak-free installation.
  
• Advanced Contaminant Reduction : Reduce 31 contaminants including lead, chlorine, odors, chemicals, and sediments for cleaner, fresher water and ice.
  
• NSF/ANSI Certified Filtration : Independently tested to meet NSF 42 & 53 standards for water safety, taste improvement, and contaminant reduction
  
• Reliable Water Flow : Maintains strong dispenser and ice maker flow, ensuring consistent water pressure.
  
• Easy, Tool-Free Installation : Twist-to-install design makes replacing the filter quick and effortless.
  
• Supports Ice Maker & Water Dispenser : One filter supplies both systems for full-refrigerator coverage.
  
• Family-Safe Materials : Built with BPA-free, food-grade components.

Whirlpool Refrigerator Model WRX735SDHZ02

Q: Which water filter for WRX735SDHZ02 whirlpool refrigerator?
A: Your Whirlpool WRX735SDHZ02 refrigerator uses the EveryDrop Filter 4 (EDR4RXD1) water filter also known as Whirlpool Filter 4.

Q: Where is the whirlpool WRX735SDHZ02 refrigerator water filter located?
A: Whirlpool WRX735SDHZ02 water filter is located in the upper right corner inside the refrigerator compartment, behind a snap-in plastic door.

Q: How often should I replace the WRX735SDHZ02 water filter?
A: Whirlpool recommends replacing the water filter every 6 months or after 200 gallons of water use.
If your water tastes or smells unusual, replace the filter sooner.

Q: Does the WRX735SDHZ02 whirlpool refrigerator use a water filter for the ice maker too?
A: Yes. The refrigerator uses one single water filter to supply both the water dispenser and the ice maker.

Q: How do I replace the whirlpool WRX735SDHZ02 water filter?
A: Whirlpool refrigerator WRX735SDHZ02 water filter replacement is simple. Open the filter door, twist the old filter out, insert the new EveryDrop Filter 4 (EDR4RXD1), and twist to lock. Run water for 3-4 minutes, then reset the filter light by holding the “Water Filter” button for 3 seconds.

Q: Do I need to shut off the water before replacing the filter?
A: No. The fridge has an auto-shutoff valve, so you can remove and replace the filter without turning off the water supply.

Q: How do I reset the whirlpool WRX735SDHZ02 water filter?
A: After installing the new filter:Press and hold the “Water Filter” button on the control panel for 3 seconds until the light turns off.

Q: Why is my fridge still saying “Replace Filter” after changing it?
A: The indicator may not have been reset.
Hold the Water Filter Reset button for 3 seconds. If the message remains, ensure the filter is locked in place or power-cycle the fridge.

Q: Why does my WRX735SDHZ02 fridge make noise after installing a new filter?
A: This is normal. Air gets trapped in the water lines during installation. Flushing 2–3 gallons of water typically stops the noise.

Q: What is the whirlpool WRX735SDHZ02 water filter part number?
A: The Whirlpool WRX735SDHZ02 water filter part number is EveryDrop Filter 4 (EDR4RXD1).

Q: Are aftermarket filters safe?
A: Many are safe if they list NSF 42 or 53 certifications. Always verify the model compatibility: Filter 4 / EDR4RXD1.

Q: What if I’m not happy with the purchase?
A: Your satisfaction is guaranteed! Every whirlpool WRX735SDHZ02 water filter replacement comes with a 30-day return and refund assurance. If you are not happy with the purchase, simply contact us for a hassle-free refund or replacement.